Chapter 2 Printing Tasks | 112 |
Loading Envelopes in Tray 1
1Open Tray 1.
2If necessary, pull out the tray extension for the envelope size you are printing.
3Place up to ten envelopes between the paper width guides, face up, with the back flap lying against the rear paper guide.
4Slide the paper width guides until they lightly touch both sides of the envelope stack without bending it.
Note
Paper heavier than 28 lb (105 g/m²) should be printed from Tray 1 to the Left Output Bin to avoid curl.
If Tray 1 is in CASSETTE mode, the printer Attention light will flash. Press - VALUE + to change the size to match the paper size in Tray 1 and press SELECT.
1 
2 
3 
4 
Printing Envelopes