HP 917DE, 955AP, 950AP, 943AP, 940AP, 935AP Obtaining, Saving or Printing Diagnostic Test Information

Setup Utilities and Diagnostics

Obtaining, Saving or Printing Diagnostic Test Information

1.Open Compaq Diagnostics by selecting Start > Control Panel > Performance and Management > Compaq Diagnostics.

2.Select the Test tab.

3.In the scroll box, select the category or device you want to test.

4.Select a test type:

❏Quick Test—Runs a quick, general test on each device in a selected category.

❏Complete Test—Performs maximum testing on each device in a selected category.

❏Custom Test—Performs maximum testing on a selected device.

◆To run all tests for your selected device, select the Check All button.

◆To run only the tests you select, select the Uncheck All button, then select the check box for each test you want to run.

5.Select a test mode:

❏Interactive Mode—Provides maximum control over the testing process. You determine whether the test was passed or failed and may be prompted to insert or remove devices.

❏Unattended Mode—Does not display prompts. If errors are found, they are displayed when testing is complete.

6.Select the Begin Testing button.

4–8 Software Guide