Configuring Multi-streaming Audio (6 connector, Multi-streaming Audio)

Configuring sound for recording with the Realtek HD Sound Effect Manager (6-connector, Multi-streaming Audio)

The microphone connector on the front of the 6-connector audio PC is ready to use for recording sound. If you want to use another connector for recording, such as the Digital Audio In connector, use these steps to select it.

NOTE: The pink and green connectors on the front of a PC with 6-connector sound can be retasked to perform other audio functions; refer to “Retasking audio connectors using the Audio Wizard (6-connector)” on page 22.

1Click Start on the taskbar; Control Panel; Sounds, Speech, and Audio Devices; and Realtek HD Sound Effect Manager.

2Click the Mixer tab.

3In Record click the drop-down list. Choose:

RealTek HD Digital Input to use the digital audio in connector (select models only).

Line in/Mic in to use the Audio Line In (In) or the Microphone (Mic) connectors.

4Click OK to close the window.

Retasking audio connectors with the Realtek HD Sound Effect Manager (6-connector, Multi-streaming Audio)

The pink and green connectors on the front of the PC connectors can be retasked as needed.

1Click Start on the taskbar; Control Panel; Sounds, Speech, Devices; and Realtek HD Sound Effect Manager.

2Click the Audio I/O tab.

3Click the tool icon in the Front Panel section. The connector settings window displays.

4Select Enable Jack detection when device is plugged in, and click OK.

The front pink and green connectors can now be used as input or output devices.

Configuring Multi-streaming Audio (6 connector, Multi-streaming Audio)

The Realtek HD Sound Effect Manager software allows you to listen to two different audio sources on two different speaker sets.

24Getting Started Guide

Page 30
Image 30
HP a1245c, a1265w, a1260a, a1257c, a1240n, a1230n, a1224n Configuring Multi-streaming Audio 6 connector, Multi-streaming Audio