QuickSpecs
HP Basic Power Distribution Units
Overview
HP Basic PDUs are designed for simple installation, reliability and cost effective power distribution. They come in a variety of form factors and outlet configurations to meet the needs of today's
The low profile single piece design on these PDU's provides ease of access to rear devices for maintenance consideration and provides multiple mounting options. They are designed for HP racks but will also work in a large variety of third party racks as well. They can be installed on either side of the rack with outlets facing the back of the rack for easy access and improved clearance. Also for higher power density they can be installed side by side on both sides of the rack with the outlets facing in towards the center of the rack.
HP Basic PDUs are available in 1U/0U and vertical form factors in single and
Basic PDU, 1U/0U Models (H5M54A shown) | Basic PDU, Half Height Models (H5M55A shown) |
Basic PDU, Mid Height Models (H5M62A/H5M70A shown) | Basic PDU, Full Height Models (H5M67A/H5M73A shown) |
DA - 14557 North America — Version 7 — October 1, 2013 | Page 1 |
