QuickSpecs
HP Basic Power Distribution Units
Standard Features
Features List | One piece rack mount PDUs |
| Industry standard button and keyhole mounting |
| Easily accessible outlet receptacles and improved cable management |
| Models range from 1.9kVA to 19.9kVA |
|
|
Key Features | |
| 1U/0U and vertical form factors with flexible mounting options |
| Easy drop in installation |
|
|
Multiple models for | The HP Basic PDUs is available in four form factors for a variety of racks and environments. All HP Basic |
flexible installation | PDUs can be mounted to stay completely out of the critical rear maintenance path needed to service IT |
| equipment in the rack. All vertical models use industry standard button and keyhole mounting for simple |
| drop in installation in HP 11000 G2 and Intelligent Series racks and many third party racks. |
| 1U/0U Basic PDUs |
| Mounts in 1U of space in any EIA standard rack these PDUs can also mount in the side of an HP rack for 0U |
| mounting. Available in either a low voltage model with twelve NEMA |
| model with twelve IEC C13 outlets. |
| Vertical Basic PDUs |
| A variety of sizes meet the needs of many environments |
| Mounts vertically on either side in the rear of the rack using industry standard button and keyhole |
| mounting. |
| Standard mounting faces the outlet towards the rear of the rack. This configuration fully prevents |
| interference in the maintenance zone between rear RETMA rails. |
| Using the optional configuration of facing the outlets into the rack, multiple PDUs can be mounted |
| on one side of the rack for higher power density.* |
| NOTE: Facing the outlets into the rack will interfere with the lower few rack U spaces of the rear |
| maintenance zone due to breakers on the PDUs. |
|
|
DA - 14557 North America — Version 7 — October 1, 2013 | Page 4 |
