QuickSpecs
HP Basic Power Distribution Units
Standard Features
Vertical PDU Form Factors | Half Height Basic PDU |
| Designed to fit in 22U and taller racks |
| Available in low voltage and three phase models with up to 20 outlets. |
| Up to 4 Half Height PDUs can be mounted in one side of a 42U or 47U rack using the optional |
| inward facing configuration. |
| Mid Height Basic PDUs |
| Designed to fit in 36U and taller racks |
| Available in high voltage and three phase models with a combination of C13 and C19 outlets |
| for up to 36 outlets. |
| New Three Phase Dual Voltage models provide three NEMA |
| voltage equipment in a high voltage rack. |
| Full Height Basic PDUs |
| Designed for 42U and taller racks. |
| Available in three phase only with 36 x C13 and 6x C19 for a total of 42 outlets. |
| 480V Basic PDUs |
| 480V three phase 5 wire input provides 277V single phase output. |
| Unique outlets prevent connection of |
| Available in a 15 outlet Half Height and a 30 outlet Full Height model. |
NOTE: When mounted in the standard rear facing configuration only 1 Mid or Full Height Basic PDU can be mounted per side of the rack. Up to 2 Half Height Basic PDUs can be mounted per side in the standard rear facing configuration in a 42U or taller rack.
NOTE: HP 480V Basic PDUs can only be mounted in the standard rear facing configuration.
Easy Installation and | Standard button and keyhole mounting provides simple drop in installation in HP 11000 G2 and Intelligent |
compatibility | Series Rack and many third party racks. |
|
|
Warranty Upgrade | HP Basic PDUs are backed by a limited |
Options | HP Basic PDUs automatically assume the Care Pack coverage level of any covered ProLiant server in the |
| same rack. |
DA - 14557 North America — Version 7 — October 1, 2013 | Page 5 |
