3.4 Primary Setup

Figure 3.3

This option is primary to enable this product to work properly. 1.IP Address: the IP address of this device.

2.Mode: the operating mode of this device. The default mode is “Bridge”, which is the normal operation mode of a Bridge. Users can change it to the “AP” mode if you want this product to work as a wireless access point.

Figure 3.4

3.Network ID (SSID): Network ID is used for identifying the Wireless LAN (WLAN). Client stations can roam freely over this product and other Access Points that have the same Network ID. (The factory setting is “default”). Note: This item won’t take effect in “Bridge” mode.

4.Channel: The radio channel number. The permissible channels depend on the Regulatory Domain.

The factory setting is as follows:

USA/Canada

Channel 6

Europe/Australia (ETSI)

 

Japan (All)

 

 

 

Spain, France

Channel 10

 

 

Japan

Channel 14

 

 

8