HP Bridge Start, Network, Settings, Properties, Control Panel, Configuration, Specify an IP address

Network Protocols list. Click OK button to return to Network window.

7.The TCP/IP protocol shall be listed in the Network window. Click OK to complete the install procedure and restart your PC to enable the TCP/IP protocol.

8.After rebooting, click Start button and choose Settings, then click Control Panel.

9.Double click Network icon. Select the TCP/IP line that has been associated to your network card in the Configuration tab of the Network window.

10.Click Properties button to set the TCP/IP protocol for this device.

11.Select Specify an IP address in the IP Address tab. The default IP address of

22