Chapter 2 Hardware Installation
2.1Panel Layout
2.1.1 Front Panel
Figure
LED:
LED | Function | Color | Status | Description | |
POWER | Power indication | Green | On | Power is being applied to this | |
product. | |||||
|
|
|
| ||
M1 | System status 1 | Orange | Blinking | This product is functioning | |
properly. | |||||
|
|
|
| ||
WLAN | Wireless activity | Green | Blinking | Sending or receiving data via | |
wireless | |||||
|
|
|
| ||
|
|
| On | An active station is connected to | |
Link/Act. | Link status | Green | the corresponding LAN port. | ||
| |||||
1~2 | Blinking | The corresponding LAN port is | |||
|
| ||||
|
|
| sending or receiving data. | ||
|
|
|
| ||
10/100 | Data Rate | Green | On | Data is transmitting in 100Mbps | |
on the corresponding LAN port. | |||||
|
|
|
|
Port:
RESET
To reset system settings to factory defaults, please follow the steps:
1.Power off the device,
2.Press the reset button and hold,
3.Power on the device,
4.Keep the button pressed about 5 seconds,
5.Release the button,
6.Watch the M1 LED, it will flash 8 times and then M1 flash once per second.
3