HP c500 manual Taking Still, Burst and Timelapse Photos, To take Timelapse photos

Taking Still, Burst and Timelapse Photos

To take Timelapse photos:

1.Turn the camera on and turn the camera mode dial to Rec.

The status LCD displays the approximate number of photos available on the memory card. The camera is not ready until this number appears.

2.Adjust your camera settings as needed. See “Adjusting the Camera Settings” on page 42 for details.

Number of	Shutter button
photos available

Status LCD Camera mode dial On/off button

3.Press the color LCD on/off button to turn the color LCD on.

4.Press the left soft key until the Timelapse icon appears on the lower overlay bar.

Tip:	To conserve battery power, turn the color LCD off after you choose the photo type.	Timelapse
		icon

If there is not enough space on the memory card for the number of photos specified, the

red light to the left of the viewfinder flashes and the upper overlay bar displays “Not enough memory.” To solve this problem, insert a new memory card, try a lower photo quality setting or decrease the number of photos specified in the Timelapse settings.

5.Frame your subject in the viewfinder, then press and hold the Shutter button 1/2 way down to allow the camera to adjust the focus and exposure. If you see an orange light to the left of the viewfinder, there may not be enough light on your subject. You can still take the photo.

HP PhotoSmart C500 Digital Camera User’s Guide 39