HP c500 manual Adjusting the Camera Settings, To select a flash setting using the camera menus

Models: c500

1 37
Download 37 pages 56.47 Kb
Page 15
Image 15
To select a flash setting using the camera menus:

Adjusting the Camera Settings

You can also change the flash settings using the camera menus.

To select a flash setting using the camera menus:

1.Turn the camera on and turn the camera mode dial to Rec.

2.Press the Menu button.

3.Use the 4-way arrow button to scroll to the Preferences menu, then scroll down to Capture.

4.Press the Edit button (left soft key).

5.Scroll to Flash.

6.Use the 4-way arrow button to select a flash setting. See the table above for information about each of the flash settings.

Note: You cannot use the flash for Burst photos. If you choose a flash setting from the menu but you are taking Burst photos, the setting will not be effective until you take your next Still or Timelapse photo.

7.Press the Exit button (right soft key) twice to save the settings and exit the menus.

Tip: To conserve battery power, turn the color LCD off after you choose the setting.

HP PhotoSmart C500 Digital Camera User’s Guide

44

Page 15
Image 15
HP c500 manual Adjusting the Camera Settings, To select a flash setting using the camera menus