HP c500 Changing the Flash Setting, Adjusting the Camera Settings, To change the flash setting

Adjusting the Camera Settings

Changing the Flash Setting

To change the flash setting:

1.Turn the camera on and turn the camera mode dial to Rec.

2.Press the Flash button repeatedly until the flash setting you want

displays on the status LCD. The flash setting is effective for Still				Flash button
and Timelapse photos, and remains until you change it, even if
you turn the camera off.
Note:	You cannot use the flash for Burst photos; the flash button is inactive.
The flash settings are indicated by icons on the status LCD:
		Auto	The camera determines the need for a flash based on lighting
			conditions. This is the default setting.
		On	The flash will be used, regardless of the lighting conditions.
		Off	The flash will not be used, regardless of the lighting conditions.
		Auto with red-eye	The flash will be used if needed. Red-eye reduction minimizes the
		reduction	occurrence of red-eye in photos of people or animals by flashing
			twice.
Note:	The flash needs to recharge between photos. When the red light next to the viewfinder is off, you can
	take another flash photo.

HP PhotoSmart C500 Digital Camera User’s Guide 43