Note To clear the memory, you can also delete the faxes stored in memory by turning off the HP All-in-One.
Cause An error condition is preventing the HP All-in-One from receiving faxes and Backup Fax Reception is set to Off.
Solution Check for the following problems:
●The HP All-in-One is turned off. Press the On button to turn on the device.
●The HP All-in-One is not set up properly for faxing.
●There is no paper loaded in the input tray.
●There is a paper jam.
●The ink cartridge door is open. Close the ink cartridge door.
●The print head assembly is stalled. Turn the HP All-in-One off, remove any objects that are blocking the print head assembly (including any packing materials), and then turn the HP All-in-One on again.
Note If Backup Fax Reception is enabled and you turn off the HP All-in-One,
all faxes stored in memory are deleted, including any unprinted faxes that you might have received while the HP All-in-One was in an error condition. You will need to contact the senders to ask them to resend any unprinted faxes. For a list of the faxes you have received, print the Fax Log. The Fax Log is not deleted when the HP All-in-One is turned off.
After you resolve any problems found, the HP All-in-One can begin answering incoming fax calls.
Fax tones are recorded on my answering machineCause The answering machine is not set up properly with the HP All-in-One or the Rings to Answer setting is not correct.
Solution
Note This possible solution applies only in the countries/regions that receive a 2-wire phone cord in the box with the HP All-in-One, including: Argentina, Australia, Brazil, Canada, Chile, China, Colombia, Greece, India, Indonesia, Ireland, Japan, Korea, Latin America, Malaysia, Mexico, Philippines, Poland, Portugal, Russia, Saudi Arabia, Singapore, Spain, Taiwan, Thailand, USA, Venezuela, and Vietnam.
