HP c8000 (Optional) Adjusting the mid-weightouter slide assemblies

4.Extending the cable management arm, slide the server forward.

5.Route the cables through the cable management arm.

6.Install hook-and-loop straps, as needed, to secure the cables.

NOTE: These steps apply only if the adjustment of the outer slide assemblies are necessary to fit shallower or deeper third-party racks.

1.Remove the slide-locking clips from the outer slide assemblies.

2.Adjust the slide assemblies for your rack, and then install the slide-locking clips.

Contents

About this device Kit contents Hardware kit contents Optional hardware kit contents (J1539-63004) Required tools Rack warning Mid-weightslides overview Installing the mid-weightslides in a rack Installing the mid-weightinner slides Marking your rack columns using the mid-weight slide-mountingalignment tool Installing the mid-weightslides in round-holeor square-holeracks Installing the mid-weightslides in threaded-holeracks Installing the mid-weightslides in early HP racks Sliding the server into the mid-weightouter slide assemblies (Optional) Adjusting the mid-weightouter slide assemblies Shipping a rack with an integrated server