Identifying Enclosure and Component Features
Disk Drives and Drive Blanks
The drive bays on the front of the enclosure are numbered as follows:
1 | 4 | 7 | 10 |
|
|
|
|
2 | 5 | 8 | 11 |
|
|
|
|
3 | 6 | 9 | 12 |
|
|
|
|
The features of the drives and blanks are illustrated in Figure
Figure 2-2: Drive (in carrier) and drive blank
Item Description
1Drive carrier
2Release lever
3Release button
4Fault/ID bicolor LED (amber or blue)
5Online LED (green)
6Drive blank
7Release latch
The blue ID LED illuminates when you press the unit identification button on the rear of the enclosure. This LED also illuminates when the drive or an array containing the drive is selected in a management application, such as the HP Array Configuration Utility (ACU).
The amber LED on a drive illuminates when the drive has failed or when a management application predicts that it will fail in the near future.
For more information about the meaning of various drive LED illumination patterns, refer to Table
HP StorageWorks Modular Smart Array 20 Maintenance and Service Guide |
