Client PC Configuration, $B$,$ | HP Connection Point 2W guide

Client PC Configuration

2"+)-'8

;;)

2!$!$/ (,+5)"

2!$B$"(,$!<

$$!

&;($!

$"),?)$I!$

((,(6&75

Note: If your PC provides Internet access to other computers on your network, you must uninstall your Internet sharing software now in order for your Connection Point to be the Internet sharing device.

You may also wish to uninstall the Internet sharing software from other PCs on the network for consistency and to avoid confusion.

Note: To install the Connection Point CP-2W using an 802.11b wireless PC, the following are required:

•The SSID of your client PC should be set to ConnectionPoint. (If you need help with this, refer to the documentation that came with your wireless card or adapter.)

•WEP encryption on your client PC should be disabled for the initial configuration process. (Consult your wireless adapter documentation for information on how to set this. It is recommended that you re-enable encryption after initial configuration is completed.)

10	IPAQ CONNECTION POINT CP-2W

HP Connection Point 2W manual Client PC Configuration, $B$,$

Models: Connection Point 2W

Client PC Configuration

2!$B$"(,$!<

$"),?)$I!$

Client PC Configuration

2!$B￿$￿￿￿￿￿￿"￿￿￿￿￿￿￿￿￿￿￿￿￿(￿￿￿￿￿￿￿￿￿,￿￿￿￿$!<

￿￿$￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿"￿￿￿)￿,?￿)￿￿￿￿￿￿￿￿￿￿￿￿￿$￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿I!$￿

2!$B$"(,$!<

$"),?)$I!$