HP CQ10-689NR, CQ10-688NR, CQ10-610CA manual Display assembly, Description Spare part number

13.Release the top cover by lifting the front edge until it disengages from the base enclosure.

Reverse this procedure to install the top cover.

Display assembly

Description Spare part number

25.7-cm(10.1-in) display assembly (includes display panel cable, 2 WLAN transceivers and cables, 2 WWAN transceivers and cables (select models only), and webcam/microphone module and cable):

● WSVGA, AntiGlare, LED display assembly in black for use only on Compaq Mini CQ10 LTE	638150-001
computer models
● WSVGA, anti-glare, LED display assembly in black for use only on Compaq-branded models	634493-001
● WSVGA, anti-glare, LED display assembly in black for use only on HP-branded models	633496-001
● WSVGA, anti-glare, LED display assembly in red	633498-001
● WSVGA, anti-glare, LED display assembly in blue	633499-001
● WSVGA, anti-glare, LED display assembly in white	633497-001

Before removing the display assembly, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the following components:

a.Battery (see Battery on page 40).

b.Service access cover (see Service access cover on page 43).

c.Keyboard (see Keyboard on page 55).

d.Top cover (see Top cover on page 58).

Component replacement procedures 61