HP CQ41-213AU, CQ41-206AU, CQ41-205AX, CQ41-204AU manual Webcam/microphone module select models only

Removal and replacement procedures

Webcam/microphone module (select models only)

Description	Spare part number
Webcam/microphone module	487287-001

Before removing the display assembly, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see “Battery” on page 4-7).

5.Disconnect the wireless antenna cables from the WLAN module (see “WLAN module” on page 4-14).

6.Remove the following components:

a.Hard drive cover (see “Hard drive” on page 4-8)

b.Mini Card compartment cover (see “RTC battery” on page 4-12)

c.Optical drive (see “Optical drive” on page 4-20

d.Keyboard (see “Keyboard” on page 4-21)

e.Keyboard cover (see “Keyboard cover” on page 4-24)

f.Speaker assembly (see “Speaker assembly” on page 4-26)

g.Display assembly (see “Display assembly” on page 4-28)

Remove the webcam/microphone module:

1.Lift the webcam/microphone module 1 as far from the display enclosure as the webcam/microphone module cable allows.

2.Disconnect the webcam/microphone module cable 2 from the webcam/microphone module.

3. Remove the webcam/microphone module.

Reverse this procedure to install the webcam/microphone module.

4–34 Maintenance and Service Guide