HP CQ41-206AU, CQ41-205AX, CQ41-204AU, CQ41-206AX, CQ41-207AX, CQ41-222AU Remove the modem module

Removal and replacement procedures

Remove the modem module:

1.Turn the computer right-side up, with the front toward you.

2.Remove the two Phillips PM2.0×4.0 screws 1 that secure the modem module to the system board.

3.Disconnect the modem module cable 2 from the modem module.

4.Lift up on the front of the modem module 3 to disconnect it from the system board.

Reverse this procedure to install the modem module.

✎When replacing the modem module, be sure that the connector on the bottom of the modem module connects firmly to the system board.

Maintenance and Service Guide 4–41