HP CQ41-214AU, CQ41-206AU Reverse this procedure to reassemble and install the display assembly

Removal and replacement procedures

17.If it is necessary to replace the display hinges, loosen the four Phillips PM2.0×3.0 screws 1 that secure each hinge to the display panel.

✎Remove and install the screws in the sequence indicated on the display hinge bracket.

18.Remove the display hinges 2. The Display Hinge Kit is available using spare part number 486737-001.

19.If it is necessary to replace the wireless antenna transceivers and cables, remove the Phillips PM2.5×3.0 screw 1 that secures each transceiver to the display enclosure.

20.Detach the wireless antenna transceivers 2 from the display enclosure. The transceivers are secured by a foil wrapping.

21.Release the wireless antenna transceivers and cables from the clips 3 built into the display enclosure.

22.Remove the wireless antenna transceivers and cables 4 from the display enclosure. The wireless antenna transceivers and cables are available using spare part number 502979-001 for models with discrete graphics subsystems, and spare part number 489066-001 for models with UMA graphics subsystems.

Reverse this procedure to reassemble and install the display assembly.

Maintenance and Service Guide 4–33