To burn a CD or DVD, follow these steps:

1.Download or copy the source files into a folder on your hard drive.

2.Insert a blank CD or DVD into the optical drive.

3.Select Start > All Programs, and then select the name of the software you want to use.

NOTE: Some programs may be located in subfolders.

4.Select the kind of CD or DVD you want to create—data, audio, or video.

5.Right-click Start, click Explore, and navigate to the folder where the source files are stored.

6.Open the folder, and then drag the files to the drive that contains the blank optical disc.

7.Initiate the burning process as directed by the program you have selected.

For specific instructions, refer to the software manufacturer's instructions, which may be provided with the software, on disc, or on the manufacturer's Web site.

CAUTION: Observe the copyright warning. It is a criminal offense, under applicable copyright laws, to make unauthorized copies of copyright-protected material, including computer programs, films, broadcasts, and sound recordings. Do not use this computer for such purposes.

Removing an optical disc (CD or DVD)

1.Press the release button (1) on the drive bezel to release the disc tray, and then gently pull out the tray (2) until it stops.

2.Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces.

NOTE: If the tray is not fully accessible, tilt the disc carefully as you remove it.

3.Close the disc tray and place the disc in a protective case.

8

Chapter 2 Using an optical drive