HP d3500 manual Set Eye-Fi SD Card Connection Mode

The video output signal can be switched to NTSC or PAL to accommodate different regional TV standards. The appropriate setting will vary between regions.

NTSC: USA, Canada, Taiwan, Japan, etc.

PAL: Europe, Asia (excluding Taiwan), Oceania, etc.

Note: The TV output will not display properly if an incorrect video system is selected.

Set Eye-Fi SD Card Connection Mode

This camera supports wireless connection of an Eye-Fi SD Card. Upload the photos from the camera to the Internet using the following steps:

1.Press the button, press the up/down arrow button to

select and press the button to enter the menu.

2.Press up/down arrow button to select and press the

button or right arrow button to enter the menu.

3.Press the up/down arrow button to select「Eye-Fi」and

press the button or right arrow button to enter the menu.

4.Press the up/down arrow buttons to select「On」or

「Off」and press the button to confirm.

74