HP DAT autoloader DAT 72x6e Using the CD-ROM, HP Library & Tape Tools, User documentation, CD-ROMguide, HP product registration

Using the CD-ROM

The HP StorageWorks Tape CD-ROMcontains drivers, useful utilities and information to help you install and use your autoloader. Before installation, Windows and HP-UX users can use the HP Library & Tape Tools software to check SCSI ID information on the SCSI bus. Other UNIX users may like to print off the UNIX Configuration Guide.

Drivers

For detailed information about drivers, refer to the appropriate README file in the DRIVERS directories on the HP StorageWorks Tape CD-ROM. There is a separate sub-directory for each operating system.

HP Library & Tape Tools

HP Library & Tape Tools software provides diagnostic and troubleshooting utilities. It allows you to identify your product correctly, check SCSI ID information on the SCSI bus, run tests, carry out firmware upgrades and, if necessary, generate comprehensive troubleshooting information for support calls. For further details see page 37.

User documentation

Refer to the “User Documentation” topic on the HP StorageWorks Tape CD-ROM for a UNIX Configuration Guide and an online User’s Guide that provides more detailed information about using your HP StorageWorks DAT autoloader.

Refer to your backup application’s documentation for instructions on how to back up and restore data.

CD-ROM guide

The CD-ROM guide provides an overview of the CD directory structure and information about the languages in which the contents of the CD-ROM are available. It also contains a set of URLs and links for further information.

HP product registration

To register your new autoloader electronically via the web, use the “Product Registration” link

on the HP StorageWorks Tape CD-ROM.

7