Hardware Overview and Quick Start Installation and Initial Setup
Quick Start Hardware Installation and Initial Setup
9.Specify the RADIUS clients.
Using vi or another text editor, edit the /etc/raddb/clients.conf file to include the switches that will use the DCM Controller’s RADIUS service. For each client, include the IP address and the shared secret, which must match the secret configured on the switch.
a.Enter:
vi /etc/raddb/clients.conf
b.Locate the Client line.
Client <IP address> {
secret | = | <shared secret> |
shortname | = | <short name> |
} |
|
|
c.Press i to enter insert mode.
d.Edit the following options:
Replace <IP address> with the IP address of a switch that will use the DCM Controller’s RADIUS server.
Replace <secret> with the shared secret that will also be configured on the switch.
Replace <shortname> with a descriptive name for the switch only.
e.Press the Esc key to exit insert mode and return to command mode.
f.Enter the following to save your changes and exit the file:
:wq
g.Reboot the DCM Controller: reboot
10.Access the DCM Controller’s Web browser interface.
a.Open a Web browser.
N o t e | There should not be a Web proxy server between your management worksta- |
| tion and the DCM Controller. |
| b. Enter https://<IP address>:8181/dcmWeb as the URL. |
| |
| Replace <IP address> with the IP address that you configured for the |
| DCM Controller. You might have to accept the certificate exception. |
