Getting Started

plug it in again. The computer will restart if automatic start on power loss is set in Computer Setup. If it does not restart, press the power button to start the computer.

■Reconfigure your computer after installing a non–plug and play expansion board or other option. See “Solving Hardware Installation Problems” on page 22 for instructions.

■Be sure that all the needed device drivers have been installed. For example, if you are using a printer, you need a driver for that model printer.

■Remove all bootable media (diskette, CD, or USB device) from the system before turning it on.

■If you have installed an operating system other than the factory-installed operating system, check to be sure that it is supported on the system.

Getting Started

www.hp.com

13