Miele DA362-110 Air extraction mode Non-returnflaps, Reducing collar, Exhaust connection

Installation

Air extraction mode

Non-return flaps

^Place the non-return flaps into the exhaust connections at the top of the motor assembly so that the flaps open in the "up" direction.

^Turn the non-return flaps slightly to the left to lock them in place.

Reducing collar

^If using 5" (125 mm) ducting, place the reducing collars into the exhaust connections and turn left to lock them in place.

Exhaust connection

^Connect the ductwork to the exhaust connection using appropriate measures for the type of ductwork being installed (hose clamp, duct tape, etc.).

Note: A Y- adapter may be used to feed the exhaust from both exhaust connections into a common duct.

29