Operation, Selecting mode of operation | Bifinett KH 150 specification

4.Never use the slicer continuously for more than 10 minutes .

5.The cutting blade 12 continues to rotate for a short while after the slicer has been switched off.

6.For reasons of safety, the slice thickness must be returned to the „0“ setting after use.

Soft foodstuffs:

jDirect the food carriage 10 slowly against the cutter 12. Soft foodstuffs, for example hams or cheeses, are best cut when they are at a low temperature / lightly chilled.

Hard foodstuffs:

jWith hard foodstuffs you can direct the food car- riage 10 somewhat faster against the cutter 12. You can thus quickly prepare your required amount of of sliced foods, for example salami, bread or gherkins.

QSelecting mode of operation

Note:

The two operating modes can be switched on and off with the rocker switch for intermittent/ continuous operation 3 .

Continuous operation / max. 10 minutes (switch 3 in position „I“):

jSet the switch for intermittent / continuous operation to position „I“. The cutting blade runs without it being necessary to hold the switch in this position.

Halting continuous operation: Move the switch for intermittent / continuous operation into the „0“ position and wait until the cutting blade comes to a complete standstill.

Intermittent operation (switch for intermittent / continuous operation 3 in position „II“):

jSet the switch for intermittent / continuous operation to position „II“.The cutting blade will continue to run for as long as the switch for intermittent / continuous operation is held in this position.

Operation

Halting intermittent operation: Release the switch for intermittent / continuous operation and wait until the cutting blade comes to a complete standstill.

QSetting the Vario-switch cutting blade speed

Low revolutions / Revolution symbol narrow end:

jSet a low revolution speed when you want to cut soft foodstuffs.Push the Vario-switch 2 completely in the direction of the sharp end.

High revolutions / Revolution symbol wide end:

jUse a high revolution speed for slicing hard foodstuffs. Push the Vario-switch 2 completely in the direction of the broad end.

Note: Between the maximum and minimum adjustments you can naturally also carry out further individual settings. Practice appropriate trial slicings.

QSlice thickness - setting and cutting

Set the required slice thickness using the control knob 14 (see Figure C). The settings on the scale do not correspond with the slice thickness in mm. For safety reasons the blade is covered in setting „0“.

jPlace the food to be sliced on the food carriage 10.

If necessary, press the food to be sliced with the food holder plate 11 lightly against the food support 13.

jSwitch the appliance on and, whilst lightly pressing the food to be sliced forward, guide it along the cutting blade 12. After using the slicer always set the food support plate into the „0“ setting so that the sharp blade is covered. The cutting blade 12 is ideally suitable for cut- ting wafer-thin slices of cold cuts or boiled ham (see Fig. A).

GB 9

KH 150 specifications

The Bifinett KH 150 is an innovative kitchen appliance designed to simplify food preparation and enhance culinary creativity. Known for its versatility, this device caters to the needs of both novice cooks and seasoned chefs, offering an array of features that make it an essential addition to any kitchen.

One of the standout characteristics of the Bifinett KH 150 is its multifunctionality. It serves multiple purposes, including chopping, blending, kneading, and even steaming, allowing users to tackle a wide variety of recipes with ease. Its powerful motor ensures efficient performance, enabling quick and consistent results. With a robust design, the KH 150 can handle even tough ingredients, making it suitable for all types of culinary tasks.

The Bifinett KH 150 comes equipped with advanced technology that streamlines the cooking process. The user-friendly control panel features intuitive settings, allowing for easy adjustments based on specific recipes or personal preferences. Additionally, the appliance includes a digital timer and temperature control, which helps in achieving precise cooking results. This level of control reduces the risk of overcooking or undercooking, ensuring perfect dishes every time.

Safety is also a focal point of the Bifinett KH 150. The device includes several safety features, such as a locking lid and non-slip feet, which provide stability during operation. This attention to safety ensures that users can focus on their culinary creations without worry.

In terms of construction, the Bifinett KH 150 is built from high-quality materials that promote durability and longevity. The stainless steel components not only enhance its aesthetic appeal but also make cleaning a breeze. Many parts are dishwasher safe, which adds to the convenience of using this appliance in a busy kitchen environment.

Overall, the Bifinett KH 150 stands out in the market for its combination of versatility, user-friendliness, and innovative technology. It empowers cooks to explore new recipes and cooking techniques while ensuring safety and ease of use. Whether you're preparing a quick meal or a gourmet feast, the Bifinett KH 150 is designed to help you achieve delicious results, making it a valuable asset for any home chef. Investing in this appliance means investing in efficient cooking and culinary exploration.

Bifinett KH 150 manual Operation, Selecting mode of operation, Slice thickness setting and cutting

Models: KH 150