HP DL120 Integrated Serial ATA Simultaneous drive, Controller Transfer channels Transfer rate

QuickSpecs

HP ProLiant DL120 Generation 6

Technical Specifications

Integrated Serial ATA	Simultaneous drive	4 channels
Controller	transfer channels
	Transfer rate	150 MB/s per channel; 300 MB/s in RAID 0 pair
	synchronous
	(maximum theoretical)
	Data transfer method	Intel® 82801IR Integrated Serial ATA Host Controller (non-RAID mode)
		Intel® 82801IR Integrated Serial ATA Host Controller (RAID Mode)
	Drive support	Serial ATA
	Data transfer modes	Legacy Mode
		Combined Mode
	Protocol	Serial ATA
	Feature	NCQ (Native Command Queuing); AHCI (Advanced Host Controller
		Interface)
	RAID levels supported	0, 1
	RAID Features	Supports multiple logical volumes
		Setup through ROM based Array Configuration Utility
		Installation scripting support
		NOTE: This controller does not support Hot Plug functions or LED
		functions.
	RAID OS Support	Microsoft Windows Server 2003
		NOTE: In order to implement integrated SATA RAID with Smart Start
		7.90 on Windows 2000/2003, the use of a floppy drive is necessary.
		Linux (Red Hat, SuSE, UnitedLinux)
Embedded HP NC107i	Network Interface	10Base-T/
PCIe Gigabit Server		100Base-TX/
Adapter		1000Base-TX
		Combines a triple-speed IEEE 802.3TM - Compliant Media Access
		Controller (MAC) with a triple-speed Ethernet transceiver.
	Compatibility	IEEE 802.3 10Base-T
		IEEE 802.3ab 1000Base-T
		IEEE 802.3u 100Base-TX
	Data Transfer Method	Four lane (x4), 100MHz PCI Express Reference Clock
	Controller	BCM5723
	Network Transfer Rate 10Base-T(Half-Duplex)		10 Mb/s
		10Base-T (Full-Duplex)	20 Mb/s
		100Base-TX (Half-	100 Mb/s
		Duplex)
		100Base-TX (Full-	200 Mb/s
		Duplex)
		1000Base-TX (Half and	2000Mb/s
		Full-Duplex)
	Connector	RJ-45 connector
	Cable Support	10Base-T	Categories 3, 4 or 5 UTP; up to 328 ft (100 m)
		10/100/1000Base-TX	Category 5 UTP; up to 328 ft (100 m)

DA - 13504 Worldwide QuickSpecs — Version 8 — 8/20/2010 Page 32