HP DL120 manual Network Controller, Pci-X

QuickSpecs

HP ProLiant DL120 Generation 6

Standard Features

Memory

One of the following depending on Model

Type	DDR3 1066/1333MHz Unbuffered (UDIMM) and Registered (RDIMM)
Standard (Entry Model)	2GB (1x2GB) UDIMM
Standard (Base Models)	2GB (1x2GB) UDIMM
Standard (Performance	4GB (2x2GB) RDIMM
Models)
Maximum Memory	Supports up to 16GB DDR3 1066/1333 Unbuffered ECC DIMM or 16GB
	DDR3 800/1066/1333 Registered DIMM.
	Supports up to 4 UDIMMs or 6 dual rank RDIMMs

NOTE: Depending on the memory configuration and processor model, the memory speed may run at 1333MHz, 1066MHz, or 800MHz. Please see the Online Memory Configuration Tool at: www.hp.com/go/ddr3memory-configurator.

Network Controller	Embedded NC107i Gigabit Server Adapter
Expansion Slots	Technology	Bus	Connector	Bus	Device No.**	Form	Notes
		Width***	Width	Number*		Factor
1	PCIe G2	X16	x16	0	1	Full length,
(Standard)						full height
						slot
2	PCIe G1	X4	x8	0	28	Half height,
(Standard)						low profile
						slot
1	PCI-X	64-bit	N/A	0	1	Full length,
(Optional)	(133MHz,					full height
	3.3Volt)					slot

*Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number.

**Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the lowest bus)

***Indicates the number of physical electrical lanes running to a PCI-e connector.

Storage Controllers	Entry and Base Model	HP Smart Array B110i SATA RAID Controller (RAID 0/1/1+0)
		NOTE: Transfer rate: 3Gb/s SATA
		NOTE: SATA Hot Plug available via Hot Plug Advance Pack for B110i
		NOTE: Hot Plug SAS and SATA controllers available via PCI card
		option.
		NOTE: Smart Array SAS Controller requires the HP CA ASSY 384SATA
		to MINI-SAS Kit (P/N 487734-B21) must be ordered.
	Performance Model	HP Smart Array P212/256MB Controller (RAID 0/1/1+0/5/5+0)

DA - 13504 Worldwide QuickSpecs — Version 8 — 8/20/2010 Page 4