HP dv5000 dv5000 manual Reverse the above procedure to install the Bluetooth board

Removal and Replacement Procedures

2.Remove the Phillips PM2.0×4.0 screw 1 that secures the Bluetooth module to the base enclosure.

3.Remove the Bluetooth module from the base enclosure 2.

4.Remove the Bluetooth module cable 3 from the routing channel in the base enclosure.

5.Disconnect the Bluetooth module cable 4 from the Bluetooth module.

✎The Bluetooth module cable is included with the Bluetooth module and is also available in the Cable Kit, spare part number 407774-001.

Removing the Bluetooth module

Reverse the above procedure to install the Bluetooth board.

5–50 Maintenance and Service Guide