Removal and replacement procedures

4.Turn the computer right-side up, with the front toward you.

5.Disconnect the following cables from the system board:

a.TouchPad cable 1

✎On computer models equipped with a standard display assembly, this cable connects to a ZIF connector on the system board. On computer models equipped with a Flush Glass display assembly, this cable connects to a LIF connector on the system board.

b.Fingerprint reader board cable 2

✎This cable connects to a LIF connector on the system board.

c.Speaker cable 3

✎Step 6 applies only to computer models equipped with standard display assemblies.

6.Remove the four Phillips PM2.5×4.0 screws that secure the top cover to the computer.

7.Remove the Phillips PM2.5×7.0 screw that secures the top cover to the computer.

Maintenance and Service Guide

4–31