Removal and replacement procedures
4.Remove the battery (see “Battery” on page
1.Turn the computer upside down, with the front toward you.
2.Remove the following screws:
a.Two Phillips PM2.5×7.0 screws 1 that secure the switch cover to the computer
b.Three Phillips PM2.5×4.0 screws 2 that secure the switch cover to the computer (these are inside the battery bay)
c.Three Phillips PM2.5×6.5 screws 3 that secure the keyboard to the computer
3.Turn the computer
4.Lift the rear edge of the switch cover until it detaches from the computer.
Maintenance and Service Guide |