Removal and replacement procedures
15.If it is necessary to replace the display hinges, remove the two Phillips PM2.0×3.0 screws 1 that secure each display hinge to the display panel.
16.Remove the display hinges 2. The display hinges are available in the Display Hinge Kit, spare part number
I
17.If it is necessary to remove the display panel cable, remove the adhesive plastic strip 1 from the display panel cable, and disconnect the display panel cable from the top of the display panel 2. Remove the tape 3 that secures the cable to the display panel. The display panel cable is available using spare part number
Reverse this procedure to reassemble and install the display assembly.
Maintenance and Service Guide |