Emerson VSS, VSR, VSM service manual Service, Compressor Shaft Seal Removal

Service

COMPRESSOR SHAFT SEAL REPLACEMENT

COMPRESSOR SHAFT SEAL REMOVAL

A)Prepare the compressor for servicing as outlined in section REMOVAL.

B)Remove bolts (281) holding the shaft seal cover (218). Insert two of the bolts into the threaded jacking holes to assist in removing the cover. There will be a small amount of oil drainage as the cover is removed.

C)Remove the rotating portion of the shaft seal (219C).

D)Remove oil seal (230) from cover.

E)Remove the stationary portion of the shaft seal (219B) from the seal cover using a brass drift and hammer to tap it out from the back side of the seal cover.

Seal with stationary carbon face (219B) and rotating mirror face (219C).

Current Shaft Seal and for all Replacements.

(Roll Pin #265 only used on VSS 751 and

larger models.)

71