27

15.0 Troubleshooting the JPS-10TS

Symptom Possible Cause Correction

Motor will not start Low voltage. Check power line for proper volt age.
Open circuit in motor or loose
connectio n. Inspect al l lead conne ctions o n motor fo r
loose or open connections.
Motor will not start: fuses
or circuit breakers blow. Short circu it in line cord or plu g. Inspect cord or plug for dama ged insulati on
and shorted wires.
Short circu it in motor or loose
connectio ns. Inspect all connections on m otor for loose or
shorted termi nals or worn insulation.
Incorrect fuses or circuit breakers in
power line. Install correct fuses or circuit breakers.
Motor overheats. Motor overl oaded. Reduce load on m otor.
A
ir circulati on throug h the moto r
restricted. Clean moto r fan with compres sed air to
restore no rmal air cir culatio n.
Motor stalls, resulti ng in
blown fuses or t ripped
circuit.
Motor overl oaded. Reduce load on motor.
Short circu it in motor or loose
connectio ns. Inspect connections on motor fo r loose or
shorted termi nals or worn insulation.
Low voltage. Correct the low voltage conditions.
Incorrect fuses o
r
circuit breakers in
power line. Install correct fuses or circuit breakers.
Machine slows when
operating.
A
pplying too much pressure to
workpiece. Feed workpiece m ore slowly.
Bel
t
loose. Tighten bel
t
.
Loud, repetitive noise
coming from machine. Pulley setscr ews or keys are m issing
or loose. Inspect keys and setscrews. Replace or
tighten if nec e ss ary.
Motor fan is hitti ng the cover. Tighten fan or shim c over.
V-belt is defective. Replace V -belt.
Blade not s quare wit h
miter slot, or fe nce not
square to bla de.
Blade is warped. Replace saw blade.
Table top not pa rallel to blade.
A
djust table parallel to blade.
Fence not parallel to blade.
A
djust fence parallel to blade.
Blade does not reach 90
degrees. 90 degree stop is ou t of adjustment .
A
djust 90 degree stop.
Pointer bra cket is hitting before t he
blade reaches 90 degrees. File down th e
ight side of the pointer
bracket unt il the blade can reach 90
degrees.

Table 2

16.0 Replacement Parts

Replacement parts are listed on the follow i ng pages. To order parts or reach o ur service dep artment, call

1-800-274-6848 Monday through Friday (see our website for business hours, www.waltermeier.com).

Having the Model Number and Serial Number of your machine available w hen you call will allow us to

serve you quickly and accurately.