6.0Features
Figure 1
7.0 Specifications
Model number | ............................................... | ||
Stock numbers: |
| (Steel Wings) | (Cast Iron Wings) |
Saw Unit only with Steel Wings | 708490 | ||
Saw Unit only with Cast Iron Wings | .................................................... | 708491 | |
Saw with 30” Rails/Fence Kit | 708492K | 708494K | |
Saw with 52” Rails/Fence Kit & Wood Ext. Table | ........................ 708493K | 708495K | |
Motor and electricals: |
|
|
|
Motor type | totally enclosed fan cooled, induction, capacitor start, with reset button | ||
Horsepower |
| ||
Phase |
| single | |
Voltage |
| 115/230V (prewired 115V) | |
Cycle |
| 60Hz | |
Listed FLA (full load amps) |
| 14/7 A | |
Starting amps |
| 84 A | |
Running amps (no load) |
| 4 A | |
Start capacitor |
| 200MFD, 125VAC | |
Run capacitor |
| 35μF, 300VAC | |
Power transfer |
| ||
On/off switch |
| push button | |
Motor speed |
| 3450 RPM | |
Power cord length |
| 6 ft. (183cm) | |
Power plug installed |
| yes | |
Recommended circuit and fuse/breaker size1 | 20A (115V), or 15A (230V) | ||
Sound emission | 80 dB at 30” (762mm) from blade, without load | ||
1 subject to local/national electrical codes.
8
