Toshiba PTA71, PTA70, PSAA9 manual Replacement Procedures System Board, MIC cable, AC-IN Cable

4 Replacement Procedures 4.13 System Board, MIC cable, AC-IN Cable

Installing the System Board, MIC cable, AC-IN cable

Install the System Board, MIC cable, AC-IN cable according to the following procedures and figure 4-32.

NOTE:

Be careful of the eject button for the PC card. It can be damaged when installing the system board. Make sure it is securing installed.

1.Turn the system board upside down and connect the AC-IN cable to CN503.

2.Turn the system board over and connect the RJ11 cable to CN50 on the system board

3.Seat the system board in the correct position.

4.Secure the system board with one M2x4 black flat-head screw.

5.Seat the MIC in the correct position and connect the MIC cable to CN28 on the system board.

4-52 Satellite A100/A105 / TECRA A7 Maintenance Manual