4.5 Wireless LAN Card 4 Replacement Procedures
4.5 Wireless LAN Card Removing the Wireless LAN Card
Remove the wireless LAN card according to the following procedures and Figure 4-15.
CAUTION: Do not touch the connectors on the wireless LAN card and in the computer
with your bare hands. Wireless LAN cards can fail if they are contaminated with sweat,
natural oils, etc. from your hands.
1. Disconnect the two antenna cables with the tweezers.
2. Spread out stopper securing the wireless LAN card until the card pops up.
3. Pull the wireless LAN card up and out at an angle.
Figure 4-15 Removing the wireless LAN card
Satellite A100/A105 / TECRA A7
Maintenance Manual 4-29