3.6 Memory Test 3 Diagnostic Programs Pattern Size: Choose the pattern size – BYTE, WORD, DWORD or ALL.
Percent (%): Choose the percentage of the defined range of the memory to
be tested.
Time Limit(h): Choose or Input the time (hour) of the defined range of the
memory to be tested.
Time Limit(m): Choose or Input the time (minute) of the defined range of
the memory to be tested.
Subtest 03 Patterns
This test item is to check whether the system memory includes base memory and
extended memory that could be accessed correctly through writing and reading
with a series of designed pattern data. Below is the parameter setting dialog
window.
Test Option: Choose the Memory part to take the test– Base Memory or
Extended Memory.
Extended Memory Test Range: Specify the test coverage range of Extended
Momory. If user chooses Total Size, it means that the whole Extended
Momory will be tested. Although user can input the parameter into other
select box, but the selected result is invalid. If user chooses Special Size,
the test of Extended Momory will be taken according to the coverage range
that user chooses or time.
Extended Memory Start Address (MB) & Extended Memory End Address
(MB): Set the range of extended memory that is to be tested, the test
coverage would be based on the setting and the value in ‘Percent (%)
mentioned at below.
Satellite A100/A105 / TECRA A7 Maintenance Manual 41