4.6 ODD Bay Module

4 Replacement Procedures

Disassembling the ODD Drive

NOTE: Do not disassemble the ODD drive when it is working normally. Disassemble or replace the ODD drive only if it fails.

Disassemble the ODD drive according to the following procedures and Figure 4-18.

1.Remove two M2x3 white flat-head screws.

2.Remove the bracket.

Figure 4-18 Removing the bracket from the ODD drive

Assembling the ODD Drive

Assemble the ODD drive according to the following procedures and Figure 4-18.

1. Seat the bracket and secure it two M2x3 white flat-head screws.

Satellite A100/A105 / TECRA A7 Maintenance Manual

4-33

Page 185
Image 185
Toshiba PSAA9, PTA71, PTA70 manual Disassembling the ODD Drive, Assembling the ODD Drive