Toshiba PTA71, PTA70 Replacement Procedures Display Assembly, Removing the Display Assembly

4 Replacement Procedures 4.7 Display Assembly

4.7Display Assembly

Removing the Display Assembly

CAUTION: Use care to avoid that the antenna cable is caught between the display assembly and computer.

Remove the display assembly according to the following procedures and Figures 4-19, 4-20.

1.Turn the computer so the back is facing you and remove two M2.5x5 black flat-head screws.

2.Restore the normal computer placement and open the display panel.

Figure 4-19 Removing the screws from the back of the computer

3.Disconnect the LCD/FL cable from CN3 on the system board.

4.Remove four M2.5x5 black flat-head screws securing the LCD module to the top cover.

5.Remove the wireless antenna cables from the top cover.

6.Remove the display module.

4-34 Satellite A100/A105 / TECRA A7 Maintenance Manual