3 Diagnostic Programs 3.2 Quick Start
During the editing, user could press F2 to confirm the DMI attribute update or press F4 to
ignore the modification. Press ESC to exit the program of DMI Write.
The confirmation screen is as below:
The attributes that have been modified would be marked in red; otherwise in yellow.
User could press F2 to save the changes, or press F4 to ignore and exit the current
program.
3.2.9 3D Sensor Test
In 3D Sensor test, the system checks whether the HDD protection is normal. This
program judges by sampling five kinds of data shown below.
No Item Contents
1 Access
platform. An access platform is leveling.
The Fixture which fixes PC by 90 degree inclination is used. 2 Test
Fixture Vibration/shock doesn't take a PCB at the time of T&D inspection.
10 Satellite A100/A105 / TECRA A7 Maintenance Manual