4 Replacement Procedures

4.19 Touch Pad and Button Board

Installing the Touch Pad and Button Board

Install the touch pad and button board according to the following procedures and Figure 4-41.

1.Connect the button board flat cable to CN2000 on the button board.

2.Seat the button board in the correct position and secure it with the two M2.5x3 flat- round-head screws.

3.Seat the touch pad in the correct position and secure it with five M2.5x4 black flat- head screws.

4.Connect the touch pad flat cables to JP1 on the touch pad.

4-66

Satellite A100/A105 / TECRA A7 Maintenance Manual

Page 218
Image 218
Toshiba PSAA9, PTA71, PTA70 manual Installing the Touch Pad and Button Board