4.6 ODD Bay Module 4 Replacement Procedures
4.6 ODD Bay Module Removing the ODD Bay Module
NOTE: The installation and removal procedures are the same for all the modules that can
be installed in the ODD bay. See the appropriate sections for the disassembly procedures
of specific modules.
Remove the ODD bay module according to the following procedures and Figures 4-16, 4-17.
1. Turn the computer upside down.
2. Remove the M2x4 black flat-head screw.
3. Turn the computer over and open the display.
4. Push out on the ODD bay module in the direction of the arrow.
CAUTION: Handle the ODD bay module carefully it can become hot during operation.
Figure 4-16 Removing the ODD bay module
Satellite A100/A105 / TECRA A7
Maintenance Manual 4-31