InFocus LP1200 appendix PinP/EXPAND, PC Card Auto Play, Audio, Installation

ENGLISH

Menu operation (continue)

EPinP/EXPAND

This menu appears when either the display enlargement or PinP functions are used.

ZOOM	POSITION	SIZE	AUTO
MODE			PIP
1	1	1	ON
2	2	2	OFF
3	3	3
	4
4	5

SIGNAL PICTURE	PinP/	PC CARD	AUDIO INSTALLATION OPTION	Ver.
	EXPAND	AUTO PLAY
ZOOM MODE		..... Selects the desired type of expand mode, type1, 2, 3 or 4 (actual size display).
POSITION		Selects the desired position of the sub image in expand or PinP mode.
SIZE		Selects the desired size of the sub image in expand or PinP mode.
AUTO PIP		Sets to move the position of PinP pictures automatically or not, when it appears on the red
		frame which shows the PinP part.

RPC CARD AUTO PLAY

			AUTO SLIDE	REPEAT	ICON
			TIME
			33 sec.	ON	ON
				OFF	OFF
SIGNAL	PICTURE	PinP/	PC CARD	AUDIO	INSTALLATION	OPTION	Ver.
		EXPAND	AUTO PLAY

AUTO SLIDE
TIME	Sets the length of time before the image switches to the next image in PC CARD automatic
	playback mode.
REPEAT	Sets to repeatedly playback the PC CARD presentation or not in PC CARD automatic
	playback mode.
ICON	Select wether to addition of card icon of PC card. Even the setting is OFF, if you press the PC
	card end button on the remote control, the card icon will automatically appear.

TAUDIO

VOLUME	MUTE
30
	ON
	OFF

SIGNAL	PICTURE	PinP/	PC CARD	AUDIO	INSTALLATION	OPTION	Ver.
		EXPAND	AUTO PLAY

VOLUME	Adjusts the volume of sound. The volume becomes louder as the number increases.
MUTE	Use to set MUTE on or off. Select ON to switch off the sound. Select OFF to switch the sound
	back on.

YINSTALLATION

IMAGE	KEYSTONE	AUTO	TEST
REVERSE		POWER ON	SIGNAL
OFF	0˚	ON	OFF
MIRROR	3˚	OFF	1
	6˚		2
INVERT	9˚		3
MIRROR,	12˚		4
	15˚
INVERT

SIGNAL	PICTURE	PinP/	PC CARD	AUDIO	INSTALLATION	OPTION	Ver.
		EXPAND	AUTO PLAY

IMAGE REVERSE Use to reverse or invert the projected image. MIRROR is used for rear projection. INVERT is effective when the projector is ceiling-mounted.

KEYSTONE ........ Adjusts keystone correction of the image. If the image becomes keystone distortion, select

the approximate setting. For normal use, select 0˚. You can use it only when IMAGE REVERSE is OFF.

AUTO POWER ON .... To select wether to boot up automatically when the power is turned on by a breaker. In this

case, the main power of the projector has to be ON. Set this when the projector is hanging on the ceiling.

•The projector is in stand-by mode when the lamp does not come on. In this case, use the remote control to turn on the lamp.

TEST SIGNAL .... Use to display the built-in test pattern on the screen.

•The display will disappear when the setting is OFF or press the button except MENU, ZOOM/FOCUS, ª , º , { ,}and START/STOP.

20