ENGLISH
Indicators
The projector has three indicators each of which shows the working condition of the projector.
The following offers solutions to possible problems. If a problem persists, turn the projector off and consult your dealer.
LAMP TEMP
RGB VIDEO
INDICATOR | SHOWS | CONDITION | POSSIBLE SOLUTIONS |
|
|
|
|
|
| • Unusual temperature |
|
|
| The power is turned off and |
|
|
| the POWER indicator lights |
|
|
| up red. |
|
|
| • The ventilation slots or air | • Remove the object from |
|
| filter is clogged with dust or | the ventilation slot. |
TEMP | blinking red | debris. | • Pull out the power |
INDICATOR | • The fan has stopped due to | ||
| an impediment. | plug and remove the | |
|
| ||
|
|
| object. If you cannot, |
|
| • The location temperature is | consult your dealer. |
|
| • Relocate the projector | |
|
| too high. | to a cooler place. |
|
| • The filter is dirty. | • Clean the filter. |
|
|
|
|
| Steady green | Normal | - |
|
|
|
|
| Blinking red/green | Lamp is almost used up. |
|
LAMP | or Blinking red |
| Replace the lamp. |
|
| ||
INDICATOR | Steady red | • Lamp is used up. | Exchange with a new |
|
| lamp if the same | |
|
| • The power is not turned on. | problem recurs. |
|
| (Power indicator lights up red.) |
|
|
|
|
|
| Steady red | Standby | - |
|
|
|
|
| Steady green | - | |
POWER |
|
|
|
| • The filter cover is not closed. | • Close the cover correctly. | |
INDICATOR | Blinking red/green | (When the TEMP indicator and |
|
| or Blinking red | the LAMP indicator are off.) | • Contact your dealer. |
|
| • Abnormal | |
|
| (When the TEMP indicator or |
|
|
| the LAMP indicator steady on or |
|
|
| blinking.) |
|
|
|
|
|
44
