InFocus LP1200 appendix Signal, Picture

MENU

SIGNAL	PICTURE	PinP/	PC CARD	AUDIO	INSTALLATION	OPTION	Ver.
		EXPAND	AUTO PLAY

or	or	or	or	or	or	or	or
! Q	W	E	R	T	Y	U	I

QSIGNAL

	AUTO	HORIZ.	VERT.	FINE SYNC.	TRACKING	RGB/Y,CB,CR
		POSITION	POSITION					Qa
	AUTO					RGB	USER
	SXGA70a	0	0	0	0	Y,CB,CR
							MEMORIZE	ENTER
	USER1							/STILL
							DELETE
	USER2						RESET
SIGNAL	PICTURE	PinP/	PC CARD		AUDIO	INSTALLATION	OPTION	Ver.
		EXPAND	AUTO PLAY

AUTO	Use to select AUTO, USER 1 or USER 2.
HORIZ. POSITION ....	Use to adjust the horizontal position of the image.
VERT. POSITION	Use to adjust the vertical position of the image.
FINE SYNC	Use to synchronize the projector with PC input signals so that the image is not blurred.
TRACKING	Use to avoid image noise such as wide stripes.
RGB/Y, CB, CR ...	The unit adjusts itself automatically when connected to either DVD players with a
	component video output terminal (Y, CB, CR or Y, PB, PR) or equipment with HDTV signal
	output capabilities. In cases where the unit is connected to equipment that include an RGB
	output terminal and which output HDTV signals, adjust the unit to RGB mode.

Qa SIGNAL - USER (Normally, there is no need for adjustments.)

	SIGNAL - USER
	CLAMP	CLAMP	HORIZ.		VERT.	PLL	VERT.		HOLD
	POSITION	WIDTH	PIXELS		LINES		SYNC.
						AUTO	AUTO	AUTO
	33	33	3333	3333		FAST	ON	ON		BEGIN END
						NORMAL	OFF	OFF
						SLOW		33 33
CLAMP POSITION/
CLAMP WIDTH			If you use a PC video card or something similar, the lighter colors of the projected image
			may become blurred. In this case, adjust CLAMP POSITION or CLAMP WIDTH.
HORIZ. PIXELS			.... Use to adjust the height of the image. The image size grows higher as the number
			increases. (Adjust to the horizontal pixels of inputting signal for normal setting.)
VERT. LINES			Use to adjust the width of the image. The image size grows wider as the number increases.
			(Adjust to the vertical lines of inputting signal for normal setting.)
PLL			Use to adjust the image which upper right side is awry. Select AUTO for normal setting.
VERT. SYNC			Use to adjust the image when its motion does not run naturally. Select AUTO for normal
			setting.
HOLD			Adjusts the image which upper right side is awry.

WPICTURE

	CONTRAST	BRIGHTNESS		TINT	COLOR	GAMMA
						CORRECTION
0		0		0	0
	USER	USER				USER
SIGNAL	PICTURE	PinP/	PC CARD		AUDIO	INSTALLATION	OPTION	Ver.
		EXPAND	AUTO PLAY

CONTRAST	Adjusts the picture contrast. The contrast becomes higher as the number increases.
BRIGHTNESS ....	Adjusts image brightness. The image becomes brighter as the number increases.
TINT	Adjusts the color balance in the image. The color balance of the image shifts green as the
	number increases and shifts to purple as the number decreases (only when NTSC or 4.43
	NTSC is selected).
COLOR	Adjusts the color intensity of the image (only when NTSC, PAL, SECAM or 4.43 NTSC is
	selected).

GAMMA

CORRECTION ... Corrects the proportion of the brightness of input signals to that of output signals. Also corrects the contrast of projected images.

ENGLISH

19