HP DV8 manual Removal and replacement procedures

Models: DV8

1 148
Download 148 pages 53.29 Kb
Page 45
Image 45

Removal and replacement procedures

Remove the mass storage devices:

1.Loosen the five Phillips PM2.5×6.0 captive screws 1 that secure the mass storage device cover to the computer.

2.Lift the rear edge of the mass storage device cover 2, swing it up and forward, and then remove the cover 3. The mass storage device cover is included in the Plastics Kit, spare part number 580404-001.

3.Disconnect the mass storage device cable 1 from the system board.

4.Grasp the Mylar tabs 2 on the mass storage device, and slide the mass storage device 3 away from the mass storage device connector.

5.Remove the mass storage device 4 from the mass storage device bay.

Maintenance and Service Guide

4–11

Page 45
Image 45
HP DV8 manual Removal and replacement procedures