Removal and replacement procedures

9.If it is necessary to replace the webcam/microphone module:

a.Remove the Phillips PM2.0×4.0 screw 1 that secures the module to the display bezel.

b.Release the webcam/microphone module 2 as far from the display bezel as the webcam/microphone module cable allows.

c.Disconnect the webcam/microphone module cable 3 from the webcam/microphone module, and remove the webcam/microphone module. The webcam/microphone module is available using spare part number 499242-001.

10.If it is necessary to replace the display hinge cover, display inverter, or webcam/microphone module cable:

a.Remove the four Phillips PM2.0×4.0 screws 1 that secure the display hinge cover to the display bezel.

b.Remove the display hinge cover 2 from the display bezel. The display hinge cover is available using spare part number 577004-001.

Maintenance and Service Guide

4–37