Input/Output Interfaces
5.8.3 HD Audio Codec
The HD Audio Codec provides pulse code modulation (PCM) coding and decoding of audio information as well as the selection and/or mixing of analog channels. As shown in Figure 5-12, analog audio from an external microphone, tape, or internal CD can be selected and, if to be recorded (saved) onto a disk drive, routed through an analog-to-digital converter (ADC). The resulting left and right PCM record data are muxed into a time-division-multiplexed (TDM) data stream (SD IN signal) that is routed to the audio controller. Playback (PB) audio takes the reverse path from the audio controller to the audio codec as SD OUT data and is decoded and either routed through an equalizer or applied directly to the digital-to-analog converter (DAC). The codec supports simultaneous record and playback of stereo (left and right) audio. The sampling rate used by the Sample Rate Controllers (SRC) may be set independently for the ADCs and the DAC. The integrated analog mixer provides the computer control-console functionality handling multiple audio inputs.
Audio
Format
Front Mic Audio In | | | | | |
| | | | |
Rear Mic Audio In [1] | | | | | |
| | | | |
CD Audio In | | Mux | | REC | |
| | | Gain | |
Line Audio In | | | | | |
| | | | |
| | | | | |
PC Beep In
| | Mux/Gain | |
| | |
Line Audio Out | PB | | | | |
HP Audio Out | Gain | | | | |
| | |
| | | | | |
PB | | | | |
| Gain | | |
| | | | | | |
NOTE:
The audio codec includes two ADCs. However, only one is typcially used.
All audio lines represent both left and right channel information. [1] CMT form factor only.
| | SDI | | | | |
| | RST# | | | |
HD | | | | HD Audio |
BCLK | | | Link Bus |
Audio | | | | | to/from |
Interface | | | | | Audio |
| | | | Controller |
| | SYNC | | |
| | | | |
| | SDO | | | |
| | | | | | |
Figure 5-12. ALC262 HD Audio Codec Functional Block Diagram
All functions are controlled through index-addressed registers of the codec.
| Technical Reference Guide | www.hp.com | 5-29 |